I have a Boss RC 505 MK2 and I would like to use a mixer to connect a Minilogue XD and an Electribe 2 and enter the first instrument input of the RC 505 MK2.
I am thinking of this solution because only two instrument inputs in the RC 505 MK2 and I have three machines to connect and only two inputs.
In the second input, I plan to plug in an Akai Mpc key 37 later.
Very important need a MUTE button on the main MAIN output.
I don't know if plugging a mixer with two machines into the input of the RC 505 MK2 is feasible and a good idea, but not really any other solutions.
Mackie or Yamaha?
I was thinking of a Mackie PROFX12V3 or a Yamaha MG10XUF.
Also very important, reliability, no hiss and extraneous noise.
I will never use microphones or anything else, just synths.
If you have any other suggestions, please let me know.
Thank you in advance for your answer.
I am thinking of this solution because only two instrument inputs in the RC 505 MK2 and I have three machines to connect and only two inputs.
In the second input, I plan to plug in an Akai Mpc key 37 later.
Very important need a MUTE button on the main MAIN output.
I don't know if plugging a mixer with two machines into the input of the RC 505 MK2 is feasible and a good idea, but not really any other solutions.
Mackie or Yamaha?
I was thinking of a Mackie PROFX12V3 or a Yamaha MG10XUF.
Also very important, reliability, no hiss and extraneous noise.
I will never use microphones or anything else, just synths.
If you have any other suggestions, please let me know.
Thank you in advance for your answer.
Statistics: Posted by Trancer — Sun Jul 21, 2024 9:24 am — Replies 1 — Views 55